Lorex Technology SG620 User Manual download pdf

MODEL – SG620

Simulated (Dummy) Dome Camera

Fresh batteries will power the simulated security

camera’s indicator for about 4 months. When the

indicator dims or stops flashing, replace the

batteries

Warning: Dispose of old batteries promptly and

properly. Do not burn or bury them

Caution: If you do not plan to use the simulated

security camera with batteries for a month or

more, remove the batteries. Batteries can leak

chemicals that can destroy electronics parts

INSTALLING THE SIMULATED DOME

SECURITY CAMERA

1. Using the mounting base plate as a template,

use a pencil to mark the position of the two

screw holes on the mounting location

2. Drill two 1 inch holes in the marked positions

3. If necessary, insert the two supplied

drywall anchors into the screw holes

4. Insert a 1 inch screw through each

of the two screw holes in the mounting base

plate and into the mounting surface, then

tighten the screws.

5.Twist the top of the dome camera (with the

batteries installed) onto the base plate

Battery

Compartment

Mounting

Base Plate

INTRODUCTION

Your Lorex Simulated Security Dome Camera is

an affordable and effective theft deterrent device.

It looks like a real surveillance camera with its

flashing red indicator and dome construction. You

can mount the simulated security camera in a

visible area on a ceiling to deter possible thieves

and intruders.

Your simulated security camera comes with a

wall/ceiling mount plate, two screws and two dry

wall anchors.

INSTALLING BATTERIES

Your simulated security camera requires two “C”

batteries (not supplied) for power.

Cautions:

• Use only fresh batteries of the required size and

recommended type

• Do not mix old and new batteries, different types

of batteries (standard, alkaline, or rechargeable),

or rechargeable batteries of different capacities

Follow four steps to install batteries:

1. Open the dome camera by twisting off the

mounting base plate

2. Unscrew the battery compartment.

3. Place the batteries in the compartment

as indicated by the polarity symbols

(+ and -) marked inside.

4. The red indicator at the top of the dome

camera will flash.

1 2

Summary of Contents

Page 1 - Simulated (Dummy) Dome Camera

MODEL – SG620Simulated (Dummy) Dome CameraFresh batteries will power the simulated security camera’s indicator for about 4 months. When the indicator

Page 2 - SPECIFICATIONS

USNG THE SIMULATED SECURITY CAMERASince this unit does not have an ON/OFF switch you will need to remove the batteries when the simulated dome camera

Comments to this Manuals

No comments

Lorex Technology SG620 User Manual

Browse online or download User Manual for Camera mounting accessories Lorex Technology SG620. LOREX Technology SG620 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camera mounting accessories Lorex Technology SG620