Lorex Technology L15LD400 User Manual

Copyright © 2007 LOREX Technology Inc. www.lorexcctv.com15" LCD COLOR OBSERVATION SYSTEMWith Built-In 4 Channel Triplex Digital Video Recorder an

10L15LD400 Series - Front L15LD400 Series - Front1. DISPLAY CONTROL BUTTONS - Control the onscreen display of Cameras:• SEQ - Displays cameras 1~4 in

11L15LD400 Series - FrontL15LD400 Series - Front7. IR RECEIVER & LED INDICATORS:• IR RECEIVER - Receiver for the Remote Controller signal. • DVR S

12L15LD400 Series - Front L15LD400 Series - Front10. PLAYBACK CONTROLS: • BACK – Reverses the playback. • STOP - Stops the playback. • PAUSE – Pauses

13L15LD400 Series - SideL15LD400 Series - Side1. REMOVABLE DRIVE BAY - Drive bay to install a removable Hard Drive.2. DRIVE BAY LOCK - Locking mechani

14L15LD400 Series - Back L15LD400 Series - Back1. ALARM BLOCK CHART - Outlines the Alarm Block connections2. RS-232C - Connection port to the PC or fo

15Remote ControlRemote ControlListed below is a quick reference for the Remote Control. CHANNEL BUTTONS - Press 1~4 to select a specific camera by num

16MC7521 Cameras MC7521 CamerasThe System includes 4 CCD Color IR Day/Night Indoor/Outdoor Cameras* * Picture changes from Color to B&W under low

17Camera InstallationCamera InstallationBefore you install the camera, carefully plan where and how you will position the camera, and where you will r

18Camera Installation Connecting Cameras1. Connect the Female BNC end of the supplied 60’ extension’ cable to the camera. Connect the male Power end o

19Camera Installation2. Connect the Female end of the supplied 60’ extension cable to an open BNC camera input on the back of the System. Connect the

ii CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSID

20Connecting the Mouse Connecting the MouseConnect the supplied mouse to the PS/2 Port on the back of the unit. Alternatively, a mouse can be connecte

21Display ModesDisplay ModesInitial Loading Sequence• Connect the POWER cable located on the back of the Observation System. The unit will automatical

22Display Modes Network Status IndicatorsThe Network Indicators appear when a remote connection is made to the unit:• Indicates that there is no clien

23Display ModesDisplay ModesCameras can be displayed in Single, Quad, Sequence or PIP modes by pressing the buttons on the front panel of the System,

24Display Modes Sequence Display ModeDisplays cameras in sequence. Press the SEQ Button on the front panel of the System, or use the mouse to select t

25Display ModesZoom ModeDisplays a single camera in ZOOM Mode (200% Zoom). Select the channel to ZOOM, and press the ZOOM button on the front panel of

26Recording Mode Recording ModeRECORDING MODE:• Indicates that the camera is recording in ALARM Mode.• Indicates that the camera is recording in MOTIO

27Recording ModeRecording ModeRECORDING STATUS• Red Icon: Indicates the system is recording in Schedule, Motion or Alarm Mode.• White Icon: Indicates

28Playback Playback Starting Playback ModePress the PLAY button on the front panel of the System, or click the onscreen PLAY icon to start playback, s

29PlaybackStopping Playback ModePress the STOP button on the front panel of the System, or click the onscreen STOP icon to stop the playback.Search Mo

iiiImportant SafeguardsImportant SafeguardsIn addition to the careful attention devoted to quality standards in the manufacture process of your video

30Playback Percent Search• Use the Mouse wheel to select the recording percentage on the search bar. • Click “PLAY” to confirm and start the playback.

31PlaybackEvent Search• TIME/DATE - Displays the event time and date.• CHANNEL - Displays the channel in which the event occurred. • EVENT - Displays

32Playback The playback speed can also be adjusted using the Front Panel buttons or Remote Control:While in playback mode, use the direction keys on t

33System Setup and NavigationSystem Setup and Navigation Press the MENU button on the Front panel or Remote, or click the onscreen MENU icon to log in

34System Setup and Navigation Display Setup - Screen Setup1. VERTICAL POSITION - Adjust the vertical position of the image. 2. HORIZONTAL POSITION - A

35Record SetupRecord Setup1. RECORD SETUP - Set up recording mode, resolution, picture quality, and recording frame rate. 2. SCHEDULE SETUP - Program

36Record Setup Record Setup - Schedule Setup1. CHANNEL - Select a single channel to setup the schedule. 2. TYPE - Select a recording mode: • Continuou

37ConfigurationConfiguration 1. HDD MANAGEMENT - Includes HDD SETUP (HDD Clear), and HDD INFORMATION. 2. CAMERA SETUP - Includes CAMERA TITLE an

38Configuration CAMERA SETUP 1. CHANNEL - Select the camera to be modified. 2. TITLE - Input the camera Title, max. 8 characters. 3. BRIGHTN

39ConfigurationALARM SETUP 1. CHANNEL - Select a channel for the setup. 2. ALARM INPUT - Set up the Alarm Input type. • NORMALLY CLOSED - The A

ivImportant Safeguards Service13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to

40Configuration TIME/DATE SETUP The date and time set by the manufacturer may be different from your time zone. It is very important to configure the

41EXTERNAL DEVICEEXTERNAL DEVICE 1. TCP/IP SETUP - Configure the system Networking information. 2. PAN/TILT SETUP - Set up the parameters of th

42EXTERNAL DEVICE 3. INTERVAL - Set the interval for the system to report its IP address to the DDNS server automatically. (D- day / H- hour / M- minu

43EXTERNAL DEVICEPAN/TILT SETUP - SPEED SETUP1. PAN SPEED - Set the PANing speed (0 low ~ 7 high).2. TILT SPEED - Set the TILTing speed (0 low ~ 7 hig

44BACKUP RS232C SETUP Users can connect the System to a PC through the RS232 port. Other system control devices can also be connected through the RS23

45Data BackupData Backup System status messages: • USB STATUS - Insert USB Key - the system will check the available space. When choosing a backup siz

46Troubleshooting TroubleshootingWhen a malfunction occurs, it may not be serious and can be corrected easily. The following describes the most common

47Observation System Specifications - Appendix #1Observation System Specifications - Appendix #1Monitor SpecificationsDVR SpecificationsLCD Panel Dia

48MC7521 Camera Specifications - Appendix #2 MC7521 Camera Specifications - Appendix #2As our products are subject to continuous improvement, LOREX Te

49Full Connectivity Diagram - Appendix #3Full Connectivity Diagram - Appendix #3The following diagram outlines a general set of connections available

vGeneral PrecautionsFCC CLASS B NOTICENote:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t

50Connecting a Slave (Spot-Out) Monitor - Appendix #4 Connecting a Slave (Spot-Out) Monitor - Appendix #4Connections to a Slave Monitor / Spot-Out Mon

51Connecting Motion / Alarm Device - Appendix #5Connecting Motion / Alarm Device - Appendix #5Motion detection and Alarm controls are enabled through

52Connecting PTZ Cameras - Appendix #6 Connecting PTZ Cameras - Appendix #6PTZ Cameras (not included with this system) can be connected to the PTZ Con

53Connecting to a PC using the Serial Port - Appendix #7Connecting to a PC using the Serial Port - Appendix #7The Observation System can be connected

54Hard Drive Replacement - Appendix #8 Hard Drive Replacement - Appendix #8The Hard Drive serves the same purpose in an Observation System as a video

55Hard Drive Replacement - Appendix #8STEP 4: Secure the Hard Drive in the Casing• Use screws and tighten them, positioning the Hard Drive into place.

56Optional Accessories Optional AccessoriesThe following accessories are available to add to your existing system:EXTENSION CABLEExtends the length be

Version 1.0 LOREX PRODUCT LIMITED WARRANTY LOREX warrants, to the original retail purchaser only (the “Purchaser”), that this item (the “Product”)

It’s all on the webProduct InformationUser ManualsQuick Start GuidesSpecification SheetsSoftware UpgradesFirmware UpgradesLorex Technology Inc.VISITww

viL15LD400 Series Feature List L15LD400 Series Feature List Monitor • 15" High Resolution LCD Monitor with built in DVR• Mouse control interface

7Table of ContentsTable of ContentsGetting Started ... 9L15LD40

8Table of Contents Configuration ...... 37 - 40HDD MANAGEMENT ...

9Getting StartedGetting StartedThe SG19LD804-161 comes with the following components:CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE